ka-datsun Posted November 5, 2011 Report Share Posted November 5, 2011 i gotta a15 and 5 speed tranny im trying to sell. the a15 is built to a 1.89. Delta cam bored bottom end head work port polish race springs with mallory ign box msd coil and plug wires. 10 lb flywheel with a dual friction centerforce clutch. my email is chrislturk@hotmail.com.. location sequim washington Link to comment
RedBanner Posted November 5, 2011 Report Share Posted November 5, 2011 How much monies? Link to comment
king bee66 Posted November 5, 2011 Report Share Posted November 5, 2011 and where is sequim? Link to comment
Willdatsun Posted November 5, 2011 Report Share Posted November 5, 2011 What country? Link to comment
RedBanner Posted November 5, 2011 Report Share Posted November 5, 2011 Northern wa, usa. Close to the canadian border near bellingham I think? Oh yeah way wrong section. Link to comment
king bee66 Posted November 5, 2011 Report Share Posted November 5, 2011 technically wrong section Link to comment
gpimm Posted November 5, 2011 Report Share Posted November 5, 2011 i gotta a15 and 5 speed tranny im trying to sell. the a15 is built to a 1.89. Delta cam bored bottom end head work port polish race springs with mallory ign box msd coil and plug wires. 10 lb flywheel with a dual friction centerforce clutch. Kind of hard to get interested with no contact info... What does "built to a 1.89." mean? What delta cam? Give us some useful information. Link to comment
CWhip Posted November 5, 2011 Report Share Posted November 5, 2011 Sequim is out on the Olympic Peninsula. He's got it on CL for $999 http://seattle.craigslist.org/kit/pts/2682620433.html Link to comment
king bee66 Posted November 5, 2011 Report Share Posted November 5, 2011 that price is humorous, maybe if it had su's... Link to comment
hobbes_the_cat Posted November 6, 2011 Report Share Posted November 6, 2011 It used to have weber sidedrafts on it. I was looking at buying them, agreed on the price, then he sold them to someone else and didn't tell me.:rolleyes: by the way this motor was in the general lee car that you may have seen if you live around here. Link to comment
ka-datsun Posted November 6, 2011 Author Report Share Posted November 6, 2011 sorry i lost your number about the webers and they were 40mm which you said you didnt want. and sequim is on the olympic peninsula. im sorry its up for 999$ but there is also obo thrown in there also. im trying to get as much out of the engine as i can cause im trying to do a ka swap in my 310. make an offer. also has nismo header. it was built from a 1.5 liter to a 1.89 liter. im tellin you guys what i know about the engine my email is chrislturk@hotmail.com. Link to comment
ggzilla Posted November 10, 2011 Report Share Posted November 10, 2011 Wow, that's a great engine. Even in Japan they don't build 'em that big -- 1890cc A-series! Link to comment
king bee66 Posted November 10, 2011 Report Share Posted November 10, 2011 good to see you posting again zilla ka-datsun did you ever have a dyno done while it was running? Link to comment
ka-datsun Posted November 11, 2011 Author Report Share Posted November 11, 2011 yeah its a built little engine, and king bee no i did not. im guessing around 115 to 125. those engines dont put out much. the cool thing is that it revs up like a street bike cause of the lightweight flywheel. Link to comment
datzenmike Posted November 11, 2011 Report Share Posted November 11, 2011 Needs pictures. Specially the transmission.... http://community.ratsun.net/topic/691-how-to-post-pictures-and-keep-online-photo-albums/ How was the size increased? I'm more familiar with the L/Z/KA motors for bore and stroking them. What's involved in making a larger A series. Link to comment
wayno Posted November 11, 2011 Report Share Posted November 11, 2011 I have sent a couple emails about this engine, but got no responce.:( EDIT I guess I typed to soon, as I noticed I had an email just after I posted this responce.:rolleyes: My phone battery went dead also, so I didn't know I had a message either, when it rains it pours. :lol: Link to comment
datzenmike Posted November 11, 2011 Report Share Posted November 11, 2011 To get near 1900cc you would have to over bore from 83mm to 105mm :lol: so I guess some stroking must have been done too. A stroke increase from 83 to 89 will give 1889cc with a stock bore. Link to comment
ka-datsun Posted November 11, 2011 Author Report Share Posted November 11, 2011 well the price for the engine is $600. the picture is up on craigslist. with the tranny connected to it so you can see the tranny in it. the whole assembly of the engine is on a different forum. Link to comment
datzenmike Posted November 11, 2011 Report Share Posted November 11, 2011 Yeah that's a crappy c/l picture and no help. Can't even tell what motor that is. So how did you get it to 1.89L? Link to comment
ggzilla Posted November 11, 2011 Report Share Posted November 11, 2011 I haven't heard of any stroked A-series, but it is certainly do-able like any other engine. The stock pistons are 76mm, and the largest safe bore is 80mm but you can hog it out larger if you fit wet liners. •Bore: 76 mm •Stroke A15: 82mm •Stroke A14: 77mm Link to comment
king bee66 Posted November 12, 2011 Report Share Posted November 12, 2011 600$ with the 5 speed? that is a fair price, id check it out if you were closer Link to comment
ZackTheImpaler Posted November 12, 2011 Report Share Posted November 12, 2011 All arguements of displacement aside how'd she drive? I was watching that car on craigslist for awhile, car looked pretty hot. I heard from a few people it was pretty quick Link to comment
ka-datsun Posted November 13, 2011 Author Report Share Posted November 13, 2011 she drove really well. I ran 120 octane threw it for awhile. I was pretty quick, but not to fast. the damn thing literely revs up like a street bike. such a fast throttle respnse. and ill try and post some better pics soon. sorry about the crappy picture Link to comment
Dguy210 Posted November 15, 2011 Report Share Posted November 15, 2011 Damn, if you were closer I'd buy this. Anyone wanna drive an engine down to Cali :lol: And because I'm bored.... Link to comment
Recommended Posts