520dats Posted October 3, 2011 Report Share Posted October 3, 2011 anyone have a design for a fabricated engine mount for the 520 to fit the L20b? I got both but havent taken the time to pull out the old engine and look thanks Quote Link to comment
sycloned916 Posted October 14, 2011 Report Share Posted October 14, 2011 I think mounts from a 521 will work you just have to cut then off,or you can use some steel plate to fab some up. Quote Link to comment
yellowdatsun Posted November 5, 2011 Report Share Posted November 5, 2011 The nose of the 520 is much shorter than the 521, so it's not just the mounts that cause problems, you'll run into other fitment issues as well. Quote Link to comment
sycloned916 Posted November 5, 2011 Report Share Posted November 5, 2011 The nose of the 520 is much shorter than the 521, so it's not just the mounts that cause problems, you'll run into other fitment issues as well. And thats the truth. Problems and clearence issues! My buddy is going through it now with his 520. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.