fastdadd Posted March 9, 2008 Report Share Posted March 9, 2008 this is the truck i picked up from bluemeanie. i have spray painted it flat black and done nothing else yet Quote Link to comment
datsun dreamer Posted March 9, 2008 Report Share Posted March 9, 2008 Very Nice:)!! What are the plans???? Quote Link to comment
jesusno2 Posted March 10, 2008 Report Share Posted March 10, 2008 very cool man! i love kc 620's how does she run? ya still wanna build a frame for that honda? Quote Link to comment
yello620 Posted March 10, 2008 Report Share Posted March 10, 2008 Nice, saw you roll through town last week before you painted it. Were those pics taken at the river? Drove down your street to stop and say hi also. Didnt see the truck, not sure which house is yours yet. Jason Quote Link to comment
fastdadd Posted March 10, 2008 Author Report Share Posted March 10, 2008 dreamer-i dont really have any plans at this point just having fun crusin around in it. jn2-runs like a top blue did an awsome job on the motor. and i think i want to finish the cb650 before i get to far into the 500t(motorcycle talk ) yello-i think i have put about 200 miles on already and yes i did take those down at the boat launch today and as soon as the weather clears up i will be back out in the garage every day so stop by its the very blue house next to the appartment on the corner Quote Link to comment
fastdadd Posted June 9, 2008 Author Report Share Posted June 9, 2008 got the 8-ball peeps mirrors finished up today 1 Quote Link to comment
Pacific coast Datsun Posted June 9, 2008 Report Share Posted June 9, 2008 Hey now thats trick!! Kool mirrors! Quote Link to comment
confusion Posted June 21, 2008 Report Share Posted June 21, 2008 i just love king cab Quote Link to comment
phatdave Posted June 21, 2008 Report Share Posted June 21, 2008 Bitchin Mirrors dude. Quote Link to comment
fastdadd Posted June 21, 2008 Author Report Share Posted June 21, 2008 thank you they work nicly i need to bend the arm on the passanger side in a little more next i will get started on the lake pipes Quote Link to comment
Bleach Posted June 21, 2008 Report Share Posted June 21, 2008 is this the truck that had the lower part of the cab smashed a bit? Quote Link to comment
fastdadd Posted June 21, 2008 Author Report Share Posted June 21, 2008 yes it is but bluemeanie welded in a new panel behind passanger door and put a new bed on it i still need to fix the rocker on that side Quote Link to comment
fastdadd Posted November 29, 2008 Author Report Share Posted November 29, 2008 been doing some small things to the truck removed the fender to try and fix dent flush mounted the rear markers made a filler for the rear vallance also flush mounted the front marker while the fender is off Quote Link to comment
Llittle_Llama Posted November 30, 2008 Report Share Posted November 30, 2008 damn, thats looking good man! Quote Link to comment
bonvo Posted December 2, 2008 Report Share Posted December 2, 2008 i like how the front marker is in the shape of the datsun emblem Quote Link to comment
fastdadd Posted December 3, 2008 Author Report Share Posted December 3, 2008 i was wondering how long it was going to take for someone to comment on that....i might do the rears like a Maltese cross Quote Link to comment
fastdadd Posted March 22, 2009 Author Report Share Posted March 22, 2009 i finished up putting a 50 amp alternator from an 83 720 on today it fit with no problem did have to grind the idler arm down a bit Quote Link to comment
fastdadd Posted April 7, 2009 Author Report Share Posted April 7, 2009 i had the drive shaft made into a one piece..picked it up on Saturday went to put it in and it is to long so i will take it back and have it shortened a bit Quote Link to comment
fastdadd Posted April 11, 2009 Author Report Share Posted April 11, 2009 while i was test fitting the one piece drive shaft i noticed that is is going to rub on the cross member for the fuel tank so i took the bed off today so i can take care of it then i decide i am going to take care of the rust on the bottom of the bed while it is off i picked up some rust converter and under coating i will get started on it in the morning Quote Link to comment
fastdadd Posted April 12, 2009 Author Report Share Posted April 12, 2009 after cleaning up the loose rust and applying the rust converter i decide that before putting the under coating on i should finish making the side marker the way i wanted to Quote Link to comment
Dat620guy Posted April 12, 2009 Report Share Posted April 12, 2009 Nice job on the side marker lights. I've been trying to come up with something similar but ya beat me to it. haha. Good job on the truck so far. Quote Link to comment
fastdadd Posted April 15, 2009 Author Report Share Posted April 15, 2009 got my drive shaft back today if it stops raining long enough i will go put it in this thing is almost 65 inches long :eek: Quote Link to comment
slodat Posted April 15, 2009 Report Share Posted April 15, 2009 Why the one piece drive shaft? Quote Link to comment
fastdadd Posted April 15, 2009 Author Report Share Posted April 15, 2009 the carrier bearing went south and for the cost to replace it the price to make it one sounded good and with the bearing in there it was very close to a strait line after putting the spacer under the bearing Quote Link to comment
ariascarlos1990 Posted April 15, 2009 Report Share Posted April 15, 2009 have you got it in there yet? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.