Jump to content


Photo
* * * * - 3 votes

CAN/AM Production easy wiring boxes for EFI works for KA's SR's VG's CA's and more


  • Please log in to reply
242 replies to this topic

#241 Rjawm

Rjawm
  • Location:Burlington, WA

Posted 13 April 2013 - 11:40 AM

PM sent.



#242 HEATHEN

HEATHEN
  • Location:San Diego

Posted 28 April 2013 - 04:07 PM

I would like to purchase one.

#243 Redrumls

Redrumls
  • Location:Coarsegold ca
  • Cars:74 610, 72 510 wagon, 73 RX3 goon, 72 Toyota corona mx22, 68 camaro ss, 64 nova ss, 65 chevelle conv

Posted 29 September 2017 - 08:15 PM

I have a 510 with a ka24de swap. Been driving it for about a year with no issues. Took it out today, luckily just done the street & I noticed it started hesitating so I took it back to the house & It just died. The can am box usually lights up yellow, green & red. When I turned the key on I didn't hear my fuel pump prime up. Check the box & I had a burnt 20 amp fuse on the can am box. Changed it but still the same. Only the yellow light on the can am box lights up.? Seems like only a third of the box is working. I checked the rest of the fuses, good. Switched the relay boxes around with no luck. Something made that fuse burn on the can am box. Has anyone had an issue like this? I hope the box didn't fry...
Thanks, Greg