Jump to content

new color


JCR

Recommended Posts

decided that i didn't like the green from the factory and this shade looks a lot better

almost done still have to trim out around lights and windows, give it a sand down and hit with another coat

38653614028_medium.jpg

 

more and larger photos in the signature at cardomain

Link to comment
  • Replies 8
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

thanks

I was thinking that a big ratsun head would look good on the hood

anyone know where a can get a BIG stencil???

 

Skip. Where ya at.? I think Skip is good with the stencil thing.

 

Dig the new green.

Link to comment

Whatever happened to hand drawing out stencils? It's a pretty simple drawing, just...

 

print it out as big as you can

fix up the rough edges with a sharpy

measure out and draw a grid over it,

 

on a seperate sheet of poster board or whatever your stencil will be made of, Draw the same grid to larger scale. do the same number of squares and multiply all of your measurements by how much larger your stencil will be than the print out.

 

Now just hand draw the Rat n Wrenches onto the new grid, making sure that each line follows the same path through the new grid as it did through the smaller grid.

With a little touching up and patience, anyone can make a fairly accurate reproduction of a drawing this way. You don't have to have mad drawing skillz or anything. The more precise you want to be, the more squares you make to your grid.

 

When you're done, cut out the large drawing and take pride in your hand made stencil.

 

 

 

 

Link to comment

Skip. Where ya at.? I think Skip is good with the stencil thing.

 

 

 

been doing stencil graff for about 10 years now, Iv done a few rat and wrenches stencils.

 

but there not strait forward to paint so I dont really do them unless I paint it myself.

 

 

 

 

I wish they would give us the rat n wrenches in a vector file. I would love to do lots with it.

 

 

 

I had one somewhere.......

Link to comment

so the next thing i am working on is the busted side panels inside the cab

38653614038_medium.jpg

I am using them as a templet and cutting new ones from thin wood panels

38653614041_medium.jpg

so what i have so far minus the speaker and the covering

38653614039_medium.jpg

working on getting speakers and a covering probably vinyl of so sort Got to see what i have laying around the house

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.