fastdadd Posted August 2, 2015 Author Report Share Posted August 2, 2015 the breaks have not been working very good so i took the rear apart and found the adjusters are frozen...took them apart cleaned and got them working....much better now Quote Link to comment
fastdadd Posted August 12, 2015 Author Report Share Posted August 12, 2015 picked these up at canby...sand blasted them after work yesterday. 1 Quote Link to comment
Draker Posted August 12, 2015 Report Share Posted August 12, 2015 :thumbup: Those will look good. What media did you use? Quote Link to comment
fastdadd Posted August 13, 2015 Author Report Share Posted August 13, 2015 pretty much worn out sand.....got brand new sand in the hopper this morning Quote Link to comment
fastdadd Posted August 13, 2015 Author Report Share Posted August 13, 2015 i might try and put them on this weekend to see what size tire i can get away with Quote Link to comment
fastdadd Posted August 16, 2015 Author Report Share Posted August 16, 2015 test fitted dont see a problem with clearance the boards should be the tire height 2 Quote Link to comment
fastdadd Posted December 14, 2015 Author Report Share Posted December 14, 2015 one more piece of the puzzle...... 1 Quote Link to comment
fastdadd Posted December 14, 2015 Author Report Share Posted December 14, 2015 oh and this is how it sits as of now 1 Quote Link to comment
fastdadd Posted December 14, 2015 Author Report Share Posted December 14, 2015 another part of the puzzle 1 Quote Link to comment
fastdadd Posted December 14, 2015 Author Report Share Posted December 14, 2015 and the last part waiting for install 1 Quote Link to comment
fastdadd Posted February 21, 2016 Author Report Share Posted February 21, 2016 still collecting parts...need to start working on this i am running out of room 2 Quote Link to comment
fastdadd Posted February 22, 2016 Author Report Share Posted February 22, 2016 3 Quote Link to comment
fastdadd Posted November 6, 2016 Author Report Share Posted November 6, 2016 things happen in all due time around here Quote Link to comment
fastdadd Posted November 6, 2016 Author Report Share Posted November 6, 2016 put the car in the garage as it looked when we ended the day 3 Quote Link to comment
]2eDeYe Posted November 6, 2016 Report Share Posted November 6, 2016 Love my orchard heater :cool: Quote Link to comment
fastdadd Posted February 24, 2017 Author Report Share Posted February 24, 2017 had about an hour of free time and some motivational pick me up that and i was tired of tripping on it 2 Quote Link to comment
fastdadd Posted February 24, 2017 Author Report Share Posted February 24, 2017 now if someone would get the cross member flipped i can do motor mounts 1 Quote Link to comment
fastdadd Posted May 27, 2017 Author Report Share Posted May 27, 2017 almost an update Quote Link to comment
thisismatt Posted May 27, 2017 Report Share Posted May 27, 2017 motivational pick me up What sorcery is this?! Quote Link to comment
datsunfreak Posted May 27, 2017 Report Share Posted May 27, 2017 almost an update Might be a bit late to tell you this now, but a 510 crossmember fits directly into a B210. B) Quote Link to comment
fastdadd Posted May 28, 2017 Author Report Share Posted May 28, 2017 if i wanted an l motor that would be awesome Quote Link to comment
fastdadd Posted May 28, 2017 Author Report Share Posted May 28, 2017 What sorcery is this?! losing your job and needing to do something instead of mopping around Quote Link to comment
datsunfreak Posted May 28, 2017 Report Share Posted May 28, 2017 if i wanted an l motor that would be awesome Silly, that's not all it's good for... :P Using the 510 crossmember means not having to build your own engine mounts on the crossmember. And opens up a world of aftermarket possibilities since there are a lot more parts available for the 510, like custom engine brackets. suspension bits, etc. And in my experience, the KA will bolt right up to the 510 crossmember using truck mounts. Quote Link to comment
fastdadd Posted March 12, 2018 Author Report Share Posted March 12, 2018 i just got the second round of crossmember done.... my welding guy has a 510 wagon sitting in his garage and after looking at it the strut towers arean inch closer to the fire wall than the b210 towers 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.