LeDevil Posted November 5, 2007 Report Share Posted November 5, 2007 The PCV Valve, Is it ok to have it hooked up to the breather on the Valve cover or does it have to be hooked up to the hole in the block? I noticed that the PCV sucks in and so does the block breather "hole under exhaust header" as well or should I just block off the PCV Valve hole and for get about it??? But that leaves me with what do I do with the Block breather and Valve cover breather ?? If you guys have any pictures of what you did or suggestions feel free to post them up :D Thanks in advance Quote Link to comment
banzai510(hainz) Posted November 5, 2007 Report Share Posted November 5, 2007 if you still have the stock intake. use the PCV . hose from block to the intake. the valve cover you can route A hose to the lower part of the carb(weber make a fitting) or dont run it. I route a tube(from valve cover) to the lower part of the caR TRUCK WITH MY sidedraft set up. So it dont spray oil on the fire wall Quote Link to comment
LeDevil Posted November 5, 2007 Author Report Share Posted November 5, 2007 Cool thanks Hainz Quote Link to comment
DISLEXICDIME Posted November 5, 2007 Report Share Posted November 5, 2007 wow that is the same thing i told you twice and eaven showed you once :fu::P Quote Link to comment
LeDevil Posted November 5, 2007 Author Report Share Posted November 5, 2007 Yea I tried it and the dam metal tube keeps falling out, so I didn't know if there was another way of going about it :lol: :fu: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.