mklotz70 Posted November 27, 2009 Report Share Posted November 27, 2009 Pete has been bugging me for awhile now to do a vid of this. Had to break the first one up into two parts due to size limits. This is one of those things that you need to get right. If you can't, get someone else to do it. If you have a connection that leaks, the flare is most likely the problem.....redo it. Basically, I'm trying to help guys get this right, but it's completely your responsibility to actually get it right!!! Quote Link to comment
freaky510 Posted November 27, 2009 Report Share Posted November 27, 2009 sweet thanks!! I am going to show this to my 4x4 buds Quote Link to comment
mklotz70 Posted September 23, 2012 Author Report Share Posted September 23, 2012 I was doing some brake line flaring and bending yesterday at a buddy's so I thought I'd do up a couple of new vids while I had the stuff out. Here's the new one for flaring and bending. Quote Link to comment
mklotz70 Posted September 23, 2012 Author Report Share Posted September 23, 2012 Quote Link to comment
mklotz70 Posted September 23, 2012 Author Report Share Posted September 23, 2012 Quote Link to comment
0.C. Posted October 8, 2012 Report Share Posted October 8, 2012 Nice Videos! Have you tried flaring 3/16 stainless steel brake line using the CPP tool? Also I like to run a 1/8 drill bit instead of a deburring tool. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.