Bleach Posted September 24, 2007 Report Share Posted September 24, 2007 Located in Renton, WA 1975 620 Nissan Factory Service Manual: $SOLD! (I have a couple others I will find and post up once available) Heater airbox front cover (the part with the pull knob for the vent): $SOLD Middle 620 kingcab center console (1 piece, rear): $25 Factory side marker lenses (4): $5/set Glovebox interrior piece, factory cardboard glovebox in good condtion: $10 Underdash tray (passenger side): $10 Factory Tachometer: $500 :rolleyes: SOLD for $550! Front grill in good condition (later style, 1978-79): $20 - - - - - - - - - - - - - - I will add more items and some pictures tonight. :D Link to comment
fisch Posted September 24, 2007 Report Share Posted September 24, 2007 Located in Renton, WA Glovebox interrior piece, factory cardboard glovebox in good condtion: $10 - - - - - - - - - - - - - - I will add more items and some pictures tonight. :D Will the glove box fit a 521? I have chipmonk holes in mine! Scott Link to comment
Bleach Posted September 24, 2007 Author Report Share Posted September 24, 2007 I dont think they do. Isn't the 620 glove box a lot larger than the 521? Link to comment
BEEBANI Posted September 24, 2007 Report Share Posted September 24, 2007 I sent you a pm about the heater cover Link to comment
tdaaj Posted September 25, 2007 Report Share Posted September 25, 2007 would ya take $50 for the tach?;) Link to comment
Bleach Posted September 25, 2007 Author Report Share Posted September 25, 2007 would ya take $50 for the tach?;) :( I would but it seems I have suddenly lost the factory tachometer! ...oops :cool: Link to comment
]2eDeYe Posted September 25, 2007 Report Share Posted September 25, 2007 Damn and I was gonna offer $550 :P If you still have it could you send over that z31 master? Lemme know shipping and I'll paypal ya ;) Link to comment
Bleach Posted September 26, 2007 Author Report Share Posted September 26, 2007 I still have the master cylinder. I need to get some smaller boxes. $20 for Shady280 Two non turbo 280ZX AFM, $25 each, both tested and work Datsun Sunny hard back FSM from the UK, $30 ea New shifter boot, generic: $SOLD center console for 620, just this piece: $25 (pending purchase by RacnJsn95) Datsun radio: $SOLD for a lot of money! :D 620 front grill: $20 280ZX or 810 inner tie rod ends (new): $15/pair 620 window handles: $SOLD 620 Wiper/Wash knob: $BROKEN, in the trash now 620 black handle backing plate: $5 620 heater control display: $5 4-cyl L-series points dizzy, works: $15 2" drop blocks: $10 1981-84 Maxima front brake pads, new: $10 Header wrap (new): $20 620 antenna: $10 620 hood release cable and bracket: $10 620 throttle cable complete: $10 620 glovebox inner section (with glovebox door bolts in bag): $10 620 upper steering column cover: $5 620 tail light lenses: $SOLD 280ZX aftermarket radio install kit: $SOLD 620 upper and lower steering column cover: $20 Steering wheel: $5 620 under dash storage tray: $10 Datsun parts storage bin: $SOLD Link to comment
]2eDeYe Posted September 26, 2007 Report Share Posted September 26, 2007 No real rush on the master, won't have the new cab n frame for about a month :P It'd be nice to stack it with the rest of the parts pile though :D Nice parts bin :cool: Link to comment
tnip Posted September 27, 2007 Report Share Posted September 27, 2007 +1 on the parts bin. Link to comment
RacnJsn95 Posted September 27, 2007 Report Share Posted September 27, 2007 Hey that's the part of the console I wasnt able to get from the junkyard cuz it was destroyed... I've got 2 questions about it... 1) Would you ship it? and 2) What are the odds of you holding it for me for a couple of weeks? I'm rather poor right now :( Link to comment
PtheDude Posted September 27, 2007 Report Share Posted September 27, 2007 Ya, I'll admit it. I bought the radio. no knobs even, thats the bad part. But I will; eventually have a ridiculously stock 75 shorty for all to marvell at in wonder, including me when I add up all the dam money I threw at it. It ain't got knobs do it. bleach? wtf you do with my knobs? got em in the 350z dotcha! on the TUUUUUUURRRRRRBO>>>> Link to comment
tdaaj Posted September 27, 2007 Report Share Posted September 27, 2007 how much for the turtle? Link to comment
Bleach Posted September 27, 2007 Author Report Share Posted September 27, 2007 how much for the turtle? Fifteen dollars for the big turtle. It wasn't really used for parts, just water so its clean. hardly ever used really. The Datsun radio came to me with no knobs. It was then as it is now. I never did install it. I still can't remember if I have a 2nd radio or if I really did throw one of them out. I probably did. The 2nd one had part of a mounting bracket on it. Racin', yes I am willing to ship parts and there are good odds I'll hold it for you for 2 weeks. Link to comment
BEEBANI Posted September 28, 2007 Report Share Posted September 28, 2007 Got the heater cover today Bleach, thanks! Link to comment
Bleach Posted October 3, 2007 Author Report Share Posted October 3, 2007 That Datsun parts storage bin sold in a hurry... I think the family was planning to put sand in it for their kid to play in. Strange, huh? :) Link to comment
RB_Shaggs Posted October 3, 2007 Report Share Posted October 3, 2007 ill take the throttle cable i need it for my l16 mani Link to comment
djmoreron Posted October 4, 2007 Report Share Posted October 4, 2007 ill take the 620 taillights. ive been driving around with red tape on them for way too long... ill also take the generic shift boot. do you have a 5-speed shift knob by any chance? mine is broken, keeps spinning... Link to comment
nismopu Posted October 4, 2007 Report Share Posted October 4, 2007 find that tach yet? I will trade ya bumper and some cash for it. eh? Link to comment
Bleach Posted October 4, 2007 Author Report Share Posted October 4, 2007 ill take the 620 taillights. ive been driving around with red tape on them for way too long... ill also take the generic shift boot. do you have a 5-speed shift knob by any chance? mine is broken, keeps spinning... Ok, I'll PM you with payment info I don't have a shift knob but you could grab one from a Z. Find a wrecking yard or unlocked Z in a parking lot. :D 280ZX stock shift knobs are pretty nice. The $500 tachometer was a joke. I don't really have a 620 tach. Link to comment
Bleach Posted October 9, 2007 Author Report Share Posted October 9, 2007 ...if the Post Office wasn't closed today, several items would have been sent out including a Z31 master cylinder. Stupid P.O. Link to comment
69FJWagon Posted October 9, 2007 Report Share Posted October 9, 2007 Hey Bleach, How much for the steering column surround, shipped? 95008 zip code. In otherwords, consider it sold! - Clayton Link to comment
Recommended Posts