Jump to content


Photo
- - - - -

Upgrading/replacing your injector connectors


  • Please log in to reply
16 replies to this topic

#1 Skib

Skib

    The Kraken

  • User Administrator
  • 20,625 posts
  • Location:CA
  • Cars:1982 280ZX Turbo

Posted 15 July 2009 - 12:34 PM

heres a little info I thought Id stick up here from Blues Tech Tips
theres a ton more helpful info there too.



The new ones with the push style clip

Posted Image
Car Quest Part SK-25

Auto Zone part number is AZ #077926
GP Sorenson part number is 800-9213
AC Delco part number is PT-113
GM part number is 12085491


Posted Image
Here are two injectors readily available from a junk yard. A GM (from an Achieva and an Audi from an 89) The audi's are much better quality and include a hefty boot. The Audi had a 5 cylinder motor however there were enough connections in the engine compartment to do nearly two Zs.

"your wrong like sex in a crib and someone needs to slap the shit out of you!"

Posted Image

Now that the tears have stopped and I've brushed my teeth, welcome to ratsun..." - Rhapakatui

"I post.... therefore .. I am." - datzenmike
< Ratsun Cards order thread > ........ < 510 rear coilover order thread >


#2 Phlebmaster

Phlebmaster

    Stabbologist

  • User Administrator
  • 3,126 posts
  • Location:Oregon City, OR
  • Cars:1973 240Z- with Skib's mini rat L26 :)

Posted 15 July 2009 - 12:48 PM

Good info. :)
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen. ;)
MY_YOUTUBE_VIDEOS :D
To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!

#3 Jester

Jester

    Senior Member

  • Senior Member
  • PipPipPipPipPip
  • 4,558 posts
  • Location:Jefferson Oregon
  • Cars:'79 620KC, '93 Pathfinder, '76 GoldWing

Posted 02 August 2009 - 09:18 PM

Thanks for the part number and the link. Great site with a $#!t load of info too.

My King Cab Project SOLD

King Cab #2 Lil Blue

(OO}====={OO)

         

 

Jes


#4 Skib

Skib

    The Kraken

  • User Administrator
  • 20,625 posts
  • Location:CA
  • Cars:1982 280ZX Turbo

Posted 02 August 2009 - 09:31 PM

Its deff one to bookmark ;)

"your wrong like sex in a crib and someone needs to slap the shit out of you!"

Posted Image

Now that the tears have stopped and I've brushed my teeth, welcome to ratsun..." - Rhapakatui

"I post.... therefore .. I am." - datzenmike
< Ratsun Cards order thread > ........ < 510 rear coilover order thread >


#5 murderwagon

murderwagon

    Senior Member

  • Members
  • PipPipPip
  • 136 posts
  • Location:syracuse new york
  • Cars:1970 dime wagon, jeep ,1971 240z

Posted 06 November 2009 - 04:42 PM

has em for 3.99 a piece just replaced them all a week ago on the red dragon

#6 Jester

Jester

    Senior Member

  • Senior Member
  • PipPipPipPipPip
  • 4,558 posts
  • Location:Jefferson Oregon
  • Cars:'79 620KC, '93 Pathfinder, '76 GoldWing

Posted 06 November 2009 - 08:24 PM

The VW section at the local yard had them on sale too. :D

My King Cab Project SOLD

King Cab #2 Lil Blue

(OO}====={OO)

         

 

Jes


#7 Xnke

Xnke

    Hall Monitor

  • Members
  • PipPipPip
  • 156 posts
  • Location:Bowling Green KY
  • Cars:'72 S30

Posted 30 November 2009 - 09:30 AM

Another good source is mitsu's...the 4G64 motor has clips that fit, and don't have the little wire retainer, but instead have thumb clips. No wire to loose!

#8 I'm BLUE

I'm BLUE

    BLUE

  • Senior Member
  • PipPipPipPipPip
  • 7,867 posts
  • Location:NW Oregon
  • Cars:s30's

Posted 15 December 2009 - 04:49 PM

Not too surprising about the quality , but very good to know where they came from :-) Thanks !

(---------------For sale ------------------------)

(240z/260z/280z/280zx/200sx/KA24e/SR20det)---

DATSUN/NISSAN FOR SALE ITEMS ---> http://nwdatsuns.com...&p=39699#p39699

 

***Blue 1973 Datsun 240z ---> http://community.rat...lue-240z/page-8

***Copper 280zx-turbo ---> http://community.rat...zx-turbo/page-3

***240z V8 3-link solid axle project ---> http://community.rat...0z-project-•••/

------------------------------

http://nwdatsuns.com/

http://www.hybridz.org/

http://www.northwestfirearms.com/

 

------------------------------

 


#9 FricFrac

FricFrac

    Advanced Member

  • Members
  • PipPipPip
  • 127 posts
  • Location:Victoria, BC
  • Cars:'69 2Dr 510, '72 240Z, '81 280ZXT 3.1L Stroker, '83 280ZXT MS3, '83 280ZX, '93 300ZX Vert, '09 370Z

Posted 30 October 2010 - 11:09 PM

Here is another source for the connector/pins/waterproof plugs. I've used these and they are very good quality. Doesn't come with a boot. I used a meltable inner wall heat shrink that stays pretty flexible - works great.

http://www.bmotorspo...roducts_id/1644

Posted Image

#10 DemonZ

DemonZ

    Newbie

  • New Members
  • Pip
  • 9 posts
  • Cars:'77 280Z 2+2 '86 300ZX

Posted 01 February 2011 - 07:52 PM

Thought I'd chime in since I'm replacing mine atm. My local Autozone didnt come up with the 077926 number, just checked their site, and it's not coming up either. However they do carry The GP Sorenson part number 800-9213 for $9.99 each. They had between 1 and 3 in stock at each of the stores in Austin.

For those of yall in the Central and Eastern US, Advance Auto Parts no longer carries GP, but they do carry BWD.
I did some cross referencing using one of their computers (I used to work there some time ago) and came up with the BWD number.
The BWD number is 28419A. However, they were $14.99 each, and had to be ordered from a local warehouse.

#11 ggzilla

ggzilla

    Road Warrior

  • Senior Member
  • PipPipPipPipPipPipPipPipPipPip
  • 19,058 posts
  • Location:Maui, HI USA
  • Cars:no cars

Posted 02 February 2011 - 01:53 AM

Anybody got a tip for how do you get them on and off without breaking them?
Here today gone tomorrow

#12 Skib

Skib

    The Kraken

  • User Administrator
  • 20,625 posts
  • Location:CA
  • Cars:1982 280ZX Turbo

Posted 02 February 2011 - 01:58 AM

Anybody got a tip for how do you get them on and off without breaking them?



the stock ones?


cuz the new ones just have push clips on them

"your wrong like sex in a crib and someone needs to slap the shit out of you!"

Posted Image

Now that the tears have stopped and I've brushed my teeth, welcome to ratsun..." - Rhapakatui

"I post.... therefore .. I am." - datzenmike
< Ratsun Cards order thread > ........ < 510 rear coilover order thread >


#13 ggzilla

ggzilla

    Road Warrior

  • Senior Member
  • PipPipPipPipPipPipPipPipPipPip
  • 19,058 posts
  • Location:Maui, HI USA
  • Cars:no cars

Posted 02 February 2011 - 02:03 AM

Yes, the stock ones. They have little wire clips on them similar to the new GM and Audi connectors shown here. Most of mine have broken plastic from trying to get them off.
Here today gone tomorrow

#14 Skib

Skib

    The Kraken

  • User Administrator
  • 20,625 posts
  • Location:CA
  • Cars:1982 280ZX Turbo

Posted 02 February 2011 - 02:05 AM

Most of mine have broken plastic from trying to get them off.



yup and thats exactly why i posted this. doesnt happen with the push clips


gotta use two tiny screw drivers or picks and the clip wraps around almost all the way and you just have to pull the ends up and pop it off.
PITA not to break em.

"your wrong like sex in a crib and someone needs to slap the shit out of you!"

Posted Image

Now that the tears have stopped and I've brushed my teeth, welcome to ratsun..." - Rhapakatui

"I post.... therefore .. I am." - datzenmike
< Ratsun Cards order thread > ........ < 510 rear coilover order thread >


#15 Z-train

Z-train

    Datsun Mechanic

  • Senior Member
  • PipPipPipPipPip
  • 4,163 posts
  • Location:Tucson
  • Cars:72 240Z, 1977 810 Wagon & a 620

Posted 02 February 2011 - 02:23 AM

FYI-Bosch injectors have polarity.
Dear God,
We'll give you Justin Beiber,if you'll give us Dio back.

#16 darrel

darrel

    Hall Monitor

  • Senior Member
  • PipPipPipPip
  • 1,075 posts
  • Location:Denver
  • Cars:1973 240z(white904), 1979 620 kingcab, 1973 240z(lime yellow112)

Posted 08 April 2013 - 08:58 PM

Saab has the connectors as well. quick connect. Their brake system also has a 7 pin connector for the turbo AFM. The boots are in much better shape. but you can check the pliability when you find them. I am sure there are other connectors on the saab for the 3 pin and 5 pin(?) non turbo.



#17 JettBear22

JettBear22

    Newbie

  • New Members
  • Pip
  • 1 posts
  • Location:SoCal Inland Empire
  • Cars:78 280z 2 2 First Car

Posted 23 October 2014 - 10:55 AM

If you're on a budget Delcity.net has just the standard connectors for only $1.31 Each!! They are just the standard ones and don't come with a boot to cover it. But if someone knows where to get some boots for cheap these ones seem to be the best deal out there! Delcity.net and just look up "fuel injector"