Jump to content
  1. General

    1. General Discussion

      Talk about anything.

      538.8k
      posts
    2. Events

      Upcoming events.

      89.3k
      posts
    3. Project Datto

      A place to discuss Datsun projects.

      215.1k
      posts
    4. Datsun Stories

      Share a Datsun story.

      10.5k
      posts
  2. Datsun Discussion

    1. Cars

      A place to talk about Datsun cars.

      153.9k
      posts
    2. Trucks

      Talk about your Datsun truck.

      284.9k
      posts
    3. Other Datsuns and Nissans

      A place for all other Datsun and Nissan vehicles which don't fall into the main forums.

      15.7k
      posts
  3. Technical

    1. General Technical

      A place to discuss technical aspects which aren't necessarily covered in a specific forum.

      26.2k
      posts
    2. Engine

      If you don't know what this is, you probably shouldn't work on a car (or drive it even).

      85.2k
      posts
    3. Drivetrain

      This stuff makes your wheels turn.

      22.2k
      posts
    4. Suspension

      Springy sort of stuff.

      15.7k
      posts
    5. Electrical

      Wires and such.

      24.3k
      posts
    6. Brakes

      These things make your car stop!

      10.2k
      posts
    7. 17.1k
      posts
    8. Wheels and Tires

      Round. Rubber.

      10.1k
      posts
  4. Write Ups

    1. How-To

      Submit a "HowTo" write-up.

      8.2k
      posts
  5. Classifieds

    1. Classified Ads   (320,970 visits to this link)

      Redirect to the classified advertisements.

    2. Discussion

      Discussion about classified ads.

      1.9k
      posts
    3. 164.4k
      posts
  6. Off Topic

    1. Non Datsun Cars and Projects

      Discuss your Non-Datsun cars and projects.

      24.4k
      posts
  • Upcoming Events

  • Posts

    • And I am sorry if my statement was misleading, but I did not mean they should get to choose. 👍
    • Agreed. Which is why I would say give them the tool they have the best chance at being proficient with. 👍     Correct, most departments have a standard issue side arm that you have no choice in. There are a few cities around here that once you reach a certain milestone in your tenure, you can have more say in what that side arm is. I know at least one officer who carries a 45ACP 1911 because at 10+ years on the job they were allowed to choose their own side arm. He has said that detectives are given more leeway in their choice of weapon as well.    But I would also bet if you want to go to the city's gun range and shoot up their ammo, they only have 9mm.  😄
    • I can understand the hatred of Carlson. He says things the left doesn't want to hear. He points out some of their stupidity and it bothers them. He points it out, laughs at them and it pisses them off. 
    • If you are there to report the news it really shouldn't be obvious who you would vote for. Reporting used to be a respected profession and It was the job of the news agency and reporter to shoot for getting the facts and honest truth of what was happening and then getting that information to the public. Now it is an open battle of spin doctors who don't let the truth ruin a good story if the story agrees with thier political narrative. News agencies sell advertising and that's what buisness they are really in. Whatever shit thier reporters spew that gathers the most views the higher their advertising revenue.  There does need to be some accountability or if the tales get to tall people will stop watching. This is why Fox dropped Tucker. Spewing too many falsehoods as fact will eventually get you fired although that bar is pretty high at fox.
    • Hey Guys,   im Swapping my 620 J15 with A CA18DE (JDM S13 Sivlia Q´s) and need your Help with understand the Wiring to the ECU.   I Got every Wiring Diagram i need. ECU Pinouts are matching the DET version to 99%.   Basic Questions:   - Do i Have to Splice the Wires to the ECU in the existing wiring (From Relays , Chassis and Fuses i will be Putting in Front of ECU), or can/should i cut the ECU Cables and connect the needed Wires ?   As far is i think i know, are these all "Input" signals, such as, ECCS Power , Ingition Power and Fuel Pump.   - i got 2 White Connector-Plugs within the Engine Harness (with 1x 18 pins 1x12 Pins). Can´t i just connect the needed cables there? the ECU has no other Connection to the Rest of the old Car, so the Wires that im Splicing/Connecting, should also connect to there?    Im a bit confused as you see, maybe some of you could help me get my thoughts about this straight.   Thanks !
  • Recent Status Updates

  • Adverts

  • Member Statistics

    • Total Members
      49,181
    • Most Online
      2,169

    Newest Member
    ratfuckersam92
    Joined
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.