All Activity

I'll leave you guys tonight with this Blonde Beauty! "Joleen" by Dolly Parton. I like to take people out of their comfort zones (genres). Great song in my opinion.

Men will be men. We all have done some stupid shit we might not be proud of during our lifetime. But honestly I don't think he has anything to be ashamed of with this. If this is the worst dirt they have on this guy, I'd say he's one up on most men now a days. What the left doesn't understand I think. Is that if those same people that are dead set on canceling or destroying the opposition's image/carrier. Is that if you were to put a microscope on their entire life. They would be guilty of everything and more of what they are trying to cancel other's for. Lucky for them they don't have a carrier in television where everything you ever said or did is played back and scrutinized. Imagine what they'd find if they did the same to you or I. Ball heaters don't sound so bad when you're in the hot seat does it. The left is allowing grown harry ass pedophile men with their ass cheeks hanging out, to dance around children. And are trying to make pedophilia a normal thing. Let's put a microscope on that? And no he is not my hero. I've already said I don't agree with everything I've heard him say. So far everyone who I agree with or have something positive to say about in here, who you guys don't agree with, is my hero. I just said some good things about Maher, RFK Jr., and Cuomo. Probably not perfect men behind closed doors, why no push-back from that? I'm telling you this is a witch hunt for the left. Up until I put you on the spot (like 3 posts ago). I haven't heard any of you say anything positive about the opposition. <<<<< This is the biggest problem on the left. "He's a republican!, Oh my GOD😲!!!!He's pure Evil, get a rope!". You and I agree on more things than you could imagine. I'm clearly not far right, I'm probably closer to being an independent than anything else, and you're clearly not radical left. Which means you probably agree with more things than you can imagine with Tucker. "Yeah but he's a Republican!, he's a piece of shit who sold nut lasers at one point in his life!". COME ON!!!

Here's what I'm referring to about your hero Tucker actually selling nut lasers.

Heard these young cats a few years ago and they just shocked the hell out of me. Hands down the best busker performance I've seen to this day.

1981 Datsun 720 King Cab 4x2 automatic transmission Facebook Marketplace Huachuca City Arizona $1,500 will take $1,250

I don’t know if this is the right place to put this. If anyone is interested there is a complete 81 720 King Cab on FB Marketplace in Huachuca City Arizona. It’s South East of Tucson. The owner is asking $1,500 but she’ll go to $1,250. It’s got a rebuilt Hitachi carb but some electrical issues in the dash. Probably needs a wiring harness and sensors. A radiator, heater core, a dip stick, an oil pan seal, valve cover gasket. They put the wrong tires on it so it doesn’t turn. It’s got some issues but good candidate for restoration or unfortunately maybe a good parts truck. Color is actually silver with black interior. Someone primered black. Body is in great shape. It’s even an automatic. I’ve got an 82 I bought down there and it had a ton of issues. Huachuca City has a lot of do it your self mechanics that aren’t mechanical engineers. I was thinking of buying it and turning it into an ST but I’ve already got one and my mechanic wasn’t happy when I brought the first one in. He actually asked why I bought it.

Welcome to Ratsun, you won't regret it? If nobody has given this advice find a local glass shop. There are so many windshields and what not out there these guys should help you out? My local shop Helped me with a old Pontiac. Might be worth a shot?

im almost positive the hatchback windshield is different than the wagon and sedan style cars , but other than that I don’t know. there’s a few videos on YouTube , that the windshield crack repair you can buy at auto parts store , have like a suction cup stand thing.. Then the guy lubed the sides where suction cups are/sit ( away from crack) and then crack repair is centered over crack .. Then they slowly slide down crack .. I don’t know if that would actually work but maybe.

Maher has slowly been growin on me. I don't agree with 90% of what he believes, but I ain't gonna hate on the guy. I actually watch his podcast every now and again. I also respect the fact that he is willing to sit down and chat about shit with people on the right. I'm not talking shit but, their are only a handful of libs that are willing to sit down and have a "civil" conversation with the right. Most of them resort to name calling, censoring, and canceling anything they don't agree with. The other guy who's willing to chat is Chris Cuomo. He's further left and I agree with him less than Maher, but hey, I respect that he's willing to civilly duke it out on a stage with the right. He actually gets a ton of shit from his fellow leftist for the simple act of publically sitting down and "talking" with the right. Edit: Maher is an example of the old school left. RFK jr. is a beast and another good example of what the left used to be. I could get on board with the old school liberals. Which were honestly a lot more like today's Republicans than they are to today's dems.

I wonder if there is another car out there that has a windshield with the same curvature but a bit bigger, then I could possibly have it cut down to size. For now I'll try the resin repair route, I'm not overly optimistic though as the crack extends from the bottom of the windshield to about 2 inches from the top.

He's got like 4 kids, I'm thinking it is obviously "good enough" to get the job done. I also I don't think it is relevant or anyone really cares. Why the Hell did this get brought up again?

Sorry for the long delay in getting back to this thread. I actually had to go to work and earn some money; got home and went directly to work on the 2 loose crankshafts, and the 4 loose camshafts that I had - they’re all cleaned up now and Looking good. It turns out that the A87 head that I have, is an SSS, with the peanut combustion chambers, larger valves, and large smooth intakes ports. Question: Did this originally come on an L18 or an L20B? I also have three 210 heads; one of which has some very large/smooth intake ports and some nice unshrouding work on the valves; would this have been only for the L16, or has this been reworked for something else? I guess the question is: why would anybody bother with a 210 head? Or is this somehow special?

I know, I was asking him. I read that in his post earlier and it made me pause for a second 🤔 ???? I just figured that maybe he knew something I didn't? Maybe he had taken peak at Tucker's last physical results looking for some ammo to knock him down a peg or two in destruction.

Hey Guys, Doing my first tranny swap (no surprise there lol) . I want to have everyhting needed . I bought a 5 spd out of a 260z which is likely a 280 trans since 260 never had one stock. I cant find a single # on it outside the clutch fan. I am planning to buy the mounts off techno toy tuning https://technotoytuning.com/nissan/510/datsun-510-universal-transmission-mount it looks decent and Im gonna grab the poly mount also . I like that they allow for the exhaust channel space. Has anyone used this before? I saw another on Zcardepot https://zcardepot.com/collections/transmission/products/transmission-mount-bracket-510-68-73?_pos=1&_sid=8ed6b89b3&_ss=r&variant=31285416067185 it seem s abit less sweet but its only 40$ I may buy it in case and sell if not needed. Few questions if anyone used these or was able to modify the stock 510 or z tranny mounts? Second where the F__K are the serial or model #s on a z tranny? Ive cleaned all the gunk and found nothing. Im hopeful its not a truck tranny but either way I feel like I should have found a serial # somewhere. I found a 15 year old thread that stated no numbers in a z tranny but people were arguing the issue and I cant find the thread again. Any help is appreciated. Im asuming the clutch slave and starter will all be Z standard also since the Rockauto shows only one for all years and models (except ZX I think)....

paradime brought it up. Must be some Tucker grift.

A more pressing question is, how do you know what another man's sperm count is and how/why are you keeping track 🤣.

Thanks, First Ive heard of recurve but IM putting money into the motor now and possibly the head also if I can get a knowledgable machine shop. Like you say Im currently running 2" exhaust (upping to 2.5" next) . heat shield is in the mail. I was planning just to use a matchbox dizzy or other electronic ditributor. I havent heard of recurve and will spend some time with that thanks. The Porting may also come now but Im thinking it will wind up waiting for awhile since everyone I talk to is so busy and wants my motor in and out , I finally found a recommended guy in Mission BC who is willing to spend some time with me so I will see waht I can work out with him on the rebuild.

36 and 37 are the pin numbers on the actual light switch. It's on, on the first and second headlight positions. Power is from the 13th fuse (15 amp) from the left or the third one back from the right. The light switch is greased but after almost 40 years it has collected dirt and dried out. Try a can of electrical contact cleaner. Spray liberally and work the parking light switch. You'll probably have to remove the two piece plastic clam shell around the steering column and the steering wheel to really get at the switch properly.

I don't know...EFI is simple and reliable really. So many ways to tune etc as well. So is the LS in with no mods to bonnet?

Seent in Portland. Someone save it! I already have too many buckets and not enough time or money.

Well I brought Tucker up again, again.

Tucker is about as funny as a pile of dead puppies. At my age, I'm more worried about a low gin count than I am trying to explain this stuff to IZRL.

Thank you very much and sorry for being repetitive, but which pin is 36 and 37 I just wanna be sure.

Tucker not a comedian and definitely not funny but those who shit on him are.

The pins on the light switch are below. The 8 pin plastic plug wire colors... Pin#...... Plug wire 36 ......... Red/Blue power from the fuse box 37........... Red/Yellow to all marker/parking/license/dash lights